torqueing question

madbinkster · Post by **madbinkster** » Thu Sep 22, 2005 7:40 am

hi guys...need a little help....what is the torqueing value for the banjo bolt on the external oil line connecting near the bottom of the crankcase. I had a small leak so I replaced the crush washers but failed to get the torque specs.

thanks

cmack · Post by **cmack** » Thu Sep 22, 2005 8:01 am

madblinkster, I don't have the value on hand, but if you need a copy of the service manual, I'll gladly burn you a copy. I'm down the road in Alpharetta, so if you need a copy or want to get together for a ride. Feel free to shoot me a PM.

madbinkster · Post by **madbinkster** » Thu Sep 22, 2005 8:21 am

sorry guys.....'04 r1150r

Post by **boxermania** » Thu Sep 22, 2005 9:03 am

madbinkster, the banjo bolt calls for 25 Nm or 18 ft-lbs

madbinkster · Post by **madbinkster** » Thu Sep 22, 2005 9:40 am

thanks boxermania......