Right front and rear Turn Signals out
Moderator: Moderators
- Sharpshine
- Basic User
- Posts: 5
- Joined: Tue Jan 04, 2011 7:47 pm
Right front and rear Turn Signals out
I just had a front and rear turn signal go out on the right side. So far all I have checked is the fuses under the seat and it seems fine. My R1150r is a 2004 with 28k on odometer. It seems very specific and would imagine it might be a simple fix. Anyone have any suggestions on where I should look first? I thought it might be the bulbs burned out, but the hazards work well on all lights. I did check the forum did not see any specific post on this issue. Was hoping someone might know or had experience this issue before. I am new to this bike and a novice with a wrench but extremely excited to be on two bmw wheels.
-
AZBMWRIDER
- Basic User
- Posts: 348
- Joined: Tue Oct 08, 2013 3:43 pm
- Location: Tempe, Aridzona
Re: Right front and rear Turn Signals out
After having two wires break around the steering head on my '02 R, indicator internal lighting and right hand grip heater failure, that would be the first place I would start looking .
The wire harness is tied up way too tight with cable ties just behind the steering head area .
The wire harness is tied up way too tight with cable ties just behind the steering head area .
'02 R1150R, Atlanta Blue
Been riding since 1979, BMW's since 1981 .
4 R65's, '87 Guzzi V65 Lario .
Been riding since 1979, BMW's since 1981 .
4 R65's, '87 Guzzi V65 Lario .