shaft drive replacement
Moderator: Moderators
shaft drive replacement
does anyone knows who to replace the shaft drive on a 07 r 
- websterize
- Lifer
- Posts: 993
- Joined: Mon Oct 06, 2008 4:41 pm
-
deilenberger
- Honorary Lifer
- Posts: 4210
- Joined: Thu May 03, 2007 9:21 pm
- Location: New Jersey USA
- Contact:
Re: shaft drive replacement
My rates are equally as high, plus I charge for travel expenses to wherever.. (hey - where is this broken driveshaft?)
Don Eilenberger - NJ Shore
2012 R1200R - I love this bike!
2012 R1200R - I love this bike!
Re: shaft drive replacement
in trash



Re: shaft drive replacement
Beemerboneyard had a used drive shaft for $175 but it has been sold (http://www.beemerboneyard.com/26117665803.html) maybe you can find one at Bob's BMW or call Beemer Bone yard and get on a list. Looks like driveshafts from quite a few models will fit our bikes. Also look on the GS lists maybe someone over there has an idea who could rebuild your shaft, those guys tear stuff up on a regular basis. Looks like only the universal joint is trashed (nice job by the way) and someone out there must make them. If you get the BMW MOA magazine check there for rebuilders or after market shafts.
Excuse the wise ass replys (I was about to add one) but your original post looked a little bogus. Welcome to the list and good luck getting your bike fixed.
Excuse the wise ass replys (I was about to add one) but your original post looked a little bogus. Welcome to the list and good luck getting your bike fixed.
Last edited by mogu83 on Thu Feb 09, 2012 9:43 am, edited 1 time in total.
Harry Costello -- Jersey Shore
2007 R1200R
1974 + 75 CB125S
1971 R75
2020 Guzzi V85TT
BMWMOA 57358
2007 R1200R
1974 + 75 CB125S
1971 R75
2020 Guzzi V85TT
BMWMOA 57358
Re: shaft drive replacement
Contact Bruno here:
http://www.brunos.us/DS%20Airheads%20Oilheads.htm
He does Spline repair and drive shaft replace/rebuild on BMWs. I had him build up and remachine both
my rear drive splines and driveshaft splines on a K75C...great work!
http://www.brunos.us/DS%20Airheads%20Oilheads.htm
He does Spline repair and drive shaft replace/rebuild on BMWs. I had him build up and remachine both
my rear drive splines and driveshaft splines on a K75C...great work!
Red 2011 R1200R
Blue 1986 K75C
Steel Grey 2002 M Coupe
Blue 1986 K75C
Steel Grey 2002 M Coupe
Re: shaft drive replacement
There was a time when you could replace the U/Js in drive shafts when they were held in with circlips, but now they stake them in makiing it either a specialist repair or the whole shaft a service replacement part - both of which cost a lot more. It's what they call progress
Dewi
Dewi
Re: shaft drive replacement
i would like to apologize i did not introduce my self properly
i'm located nearby mex city

i purchase a secondhand sparepart from ebay.de specifically from http://www.bike-recyc.at
the shaft is mounted now and the bike is already running
I also appreciate those who really concerns for others
thanks again
--do not use your bike as the ultimate diving machine the shaft isnt waterproof--
i'm located nearby mex city
i purchase a secondhand sparepart from ebay.de specifically from http://www.bike-recyc.at
the shaft is mounted now and the bike is already running
I also appreciate those who really concerns for others
thanks again
--do not use your bike as the ultimate diving machine the shaft isnt waterproof--
- websterize
- Lifer
- Posts: 993
- Joined: Mon Oct 06, 2008 4:41 pm