BMW R1200R R1150R/T F800 K1200R R1100R/T R1250R RnineT Message Board

I love the simplicity of fuel injection, ease of maintenance & repair, where adjusting it is a matter of playing with a few keys on a keyboard, instead of drilling/swapping out jets. On a boxer you have x2 injectors coolant and air temp sensors, a tps and a crank sensor, O2 Plus an ecu and away ...

Do you know the analog input tolerance of the new ECU? I wouldn't think you would be able to source the OEM 12v sensor via a 5v reference from the new ECU. Typically references are for signal conditioning and not meant for sourcing devices. You could buffer the 5v ref, but the 12v sensor wont work ...

Have you ran the bottom end yet after balancing? Id like to do this as Ive heard that the boxxers run much smoother when the reciprocating mass is balanced. For the Hall sensor your best option would prolly run a 5v modded to fit the cover. The bmw oem sensor is supplied from the bat or the ecu its...

Awesome build. Contacted TTS re SC r12r build and they said nothing in the works for the immediate future. Are you running stock internals? Will there be water injection? That SC has separate oiling system? Cannot wait to see this thing done. Glad to be seeing so much progress so quickly, bravo! th...

Hi All Small update as its going on I found a problem test fitting the body work bummer.... http://i1277.photobucket.com/albums/y487/mark_duncan1/SAM_4365_zpseecae7ab.jpg http://i1277.photobucket.com/albums/y487/mark_duncan1/SAM_4366_zps523852a9.jpg and the start of the solution..... http://i1277.ph...

Hi All Just a small update, the ECU is wired in and no magic smoke appeared when it was powered up !!! doing lots of small tidy up jobs before I begin lacing up my spoked wheels and body work to paint then its time to try and start the Heretic up, once she is running she will be going away to be pro...

Awesome build Heretic! Question - what is that thing in front of your battery where the ABS unit would normally go? That is the aftermarket ECU mounted on an aluminium heatsink, the heat sink is bolted to where the standard motronic ecu would fit but instead of facing forwards as the motronic does,...

HI All sorry for the lack of updates recently, just changed jobs and life has been a bit hectic, there is progress on the Heretic though, I just haven't really had time to document it or update with good pictures , i will try to update this week-end with a decent camera I have taken a few with my ph...

Hi I have added some pics of the development bike (even though i am having to undertake some development as my bike is a twin spark. http://i1277.photobucket.com/albums/y487/mark_duncan1/gs2_zpsc7663400.jpg http://i1277.photobucket.com/albums/y487/mark_duncan1/gs3_zps2f2d70dd.jpg http://i1277.photob...

Holy Ducting Batman!! Is that the best location for the air-filter and intake? That's going to be pretty exposed to road grit and any water spray - even with the rear bodywork in place. Wouldn't it be better to have the open air filter at the join point just under the right fuel injector? (or somew...

Hi All Just a small update of pictures of the dry fit of the kit just to make sure everything is fitting as it is supposed to, I have to make a few small spacers and the guy running the cad machine forgot to add the belt thickness around the circumference of the pulleys to his belt length calculatio...

Interesting location for the supercharger. Are you aware of anyone attempting to fit it above the gearbox, driven by the outer gear ring on the clutch? (starter motor ring) It would seem like a more natural place for it? While I agree it might seem a more natural place, from an engineering standpoi...

Hi All I have begun the installation, man its a tight fit with everything having to be installed in the correct order with no instructions gulp !!!! just a little massaging of the bike being required to get the actual charger to sit in the correct location. Front view "dry fitting" to unde...

Super charger is here nearly ji**ed in my pants I can't wait to get started the installation. And a pile of wiring supplies so I can make a standalone loom for the aftermarket ECU Some of the loom supplies http://i1277.photobucket.com/albums/y487/mark_duncan1/SAM_4235_zps8b83fc1c.jpg http://i1277.ph...

Hi All A few pictures from Today's arrival of parts. The M.B.E. ECU, I just need to sit down and draw up the loom, I cant make my mind up if I should make the loom all white in colour with cable markers or make it with many colours. Can bus to OBD connector http://i1277.photobucket.com/albums/y487/m...

Hi All

The Machinist has just sent me a picture of the super charger pulley with the inbuilt custom trigger wheel pattern and wow the engineering is amazing.

Hi

My list is far too long to list hahahahahaha just have a look at my build thread, Oh added Hayabusa 6 pot calipers to the list which are in the middle of a refurb and paint.

viewtopic.php?f=2&t=30181

Hi All Just a picture or two of some more parts arriving, Hyperpro shocks, they arrived in their plastic shipping crate, and they just look amazing, you can feel the quality when you handle them. Out to play fitting at least the rear one later. http://i1277.photobucket.com/albums/y487/mark_duncan1/S...

You have installed a roll of gaffa tape to replace the ABS unit, oh well at least gaffa tape works. New ecu and coils? Are you perhaps modifying the vent tubes under the throttle bodies? The left tube seems to into the valve cover...? You are both on the right track, the "vent tube" is ac...

Hi All Looks like you've added a castor to the right side head - is this a handling mod? well spotted, that well in fact I didn't notice it, that's the out-rigger for the lift. But not what Im on about..... its staring you all right in the face, I'm modifying while trying to look half decently put ...