Page 1 of 1

blowing fuse 5

Posted: Mon Sep 05, 2016 9:50 pm
by thejavelin
04 r1150R with 11k miles
I am blowing fuse 5 and I found a melted wire by the starter. The wire was routed behind the starter, individually covered, and it is a brown 18ga wire with a light green stripe. I don't have a wiring diagram so I need some help figuring out where it goes and if it is related to my fuse issue.

Re: blowing fuse 5

Posted: Fri Sep 09, 2016 12:31 am
by InvisibleOrdinary
Check out this video… somewhere past about 1/2 way, Chris explains the wires behind the starter. And you can find the wiring diagram in here: http://home.mindspring.com/~jabrooks/

good luck.

Dave

Re: blowing fuse 5

Posted: Fri Sep 09, 2016 12:42 pm
by peels

Re: blowing fuse 5

Posted: Sat Sep 10, 2016 9:27 am
by thejavelin
Thanks guys. I don't think the video link is there but I am going to dig into this diagram this weekend.

Re: blowing fuse 5

Posted: Wed Sep 28, 2016 12:03 am
by thejavelin
I traced it straight to the ECU. Replaced the ECU and it is back up and running. Thanks