BMW R1200R R1150R/T F800 K1200R R1100R/T R1250R RnineT Message Board

Hello everyone,

Willthese aluminium head guard protectors fit on my 04 R1150R? (these, part nbr. 71607658636, or from some other brand) I've seen them on the Gs's



After a very stupid accident in which the plastic protector broke giving almost 0 protection to the cylinder head, I'm seriously considering mounting one set of these. Anyone has them on the RR? Any pics?

Cheers and VenVsss

Without putting too much time into research, my answer would be no. Those appear to be on a 1200GS "hex-head". They may fit on the 1200R but not the 1150.

Touratech has these: http://www.touratech-usa.com/shop/show. ... xwvW372CB8

yep, you're right. Not sure if they make it for the 1150, but they should. I saw the tourtech one, it's a bit "rough", not as elegant as the bmw one... I'll keep looking.

Cheers & VenVSS

Hi Alfredo,

Here's what you need for your RR, 04, twinspark.
It comes from A&S BMW Motorcycle parts:

http://www.ascycles.com/detail.aspx?ID=1447

They're worth their weight in gold!

For additional protection, they take a look at these from Hepco Becker,

http://www.ascycles.com/detail.aspx?ID=47647

Some riders put both on.

Good Luck,

Jim

The Hepco Becker bars do really protect the heads, however if your a spirited rider you will find they grind. I bought some a couple years ago, and am now careful to not get into a corner to hard, mine are flat on the bottom I wish the Stanton protectors were still available.
Don

'Stanton' style head guards are avaialble in the UK


Look up user 'Steptoe' on www.ukgser.com

He has them foundered in small batches,easy fit, come raw so that you can paint /coat as required.

Tell him i sent ya!