Page 2 of 3

Re: Mirrors that work

Posted: Fri Feb 13, 2009 5:29 pm
by thepeacebullgrunt
Hi Folks !

What are the thread size and details ? I should identify to know if an after market mirrors will fit on my R1200R handlebar... Or is it pretty much Standard for all...

My R is new from a week and I just can't stand the original round mirrors...these days I am going trough hours of web browsing to select a list of accessories to improve some details on my bike... So it appears that Mirrors, Levers and Mirrors come first in my order list.

I am browsing your post and learn a lot but was wondering if someone knew these models : http://www.streetfightersinc.com/Mirrors.htm

And particularly this sturdy one : http://www.streetfightersinc.com/GSGMirror1Black.jpg

Or this one : http://www.streetfightersinc.com/HagenMirrorF1.jpg (Not the most elegant by the way)

Or this one : http://www.streetfightersinc.com/HesaOb ... orOval.jpg

This one: http://www.streetfightersinc.com/images ... rRound.jpg (quite charming anyway)

And this Stylish one : http://www.streetfightersinc.com/images ... C%2050.jpg

Thanks !

Re: Mirrors that work

Posted: Fri Feb 13, 2009 5:33 pm
by AmostThere
There was a time where I was very excited about the mirrors with the built-in turn indicator lights on the front side so that opposing traffic would clearly see my turn signal. I believe they are similar to something offered on some Ducati models but I don't have the link to the version that fits other bikes. I suppose it depends on what your objective is...

Re: Mirrors that work

Posted: Thu Feb 26, 2009 3:01 pm
by thepeacebullgrunt
MFW mirrors ---> http://www.mfw-wolf.de/en/products/moto ... sh-control is the German alternative to the Italian's super pricey Rizoma mirrors Wunderlich American distributor propose on its website --->http://www.wunderlichamerica.com/mm5/me ... e=R1200R-O

Those MFW mirrors are only available trough the MFW american distributor called Eurotech Motorsports located in Chico California to which I gave a call this morning but they told me that they were no longer their distributor since precisely YESTERDAY :shock:

So ! this sound like a Saga... I know... :roll:
but is anyone aware of those mirrors ? do they fit the R1200R ?
Do you know someone that sell it ?


PS: They also make this one --->http://www.mfw-wolf.de/en/products/moto ... ster-flash

And this one ---> http://www.mfw-wolf.de/en/products/motorcycle-mirrors

Now it might sound a bit "Gadget" but they are German design not Italian... so it might be functional and intelligently designed as a fine working and good sturdy looking German production.

Re: Mirrors that work

Posted: Fri Feb 27, 2009 5:10 pm
by thepeacebullgrunt
Zorry for the Kawasa kikiki on the Pic ! :roll:
Image

BREAKING NEWS ! : Since Yesterday twistedthrottle.com is the new distributor of MFW mirrors
these Master Flash mirrors kellermann&MFW are now technically available in the US.


Master Flash kellermann&MFW Mirrors also Available from EU for those interested ---> http://kellermann-online.com/km_shop/in ... 42&lang=en

Anyone saw them in real ? or own them already...

how is their quality ? do they vibrate ? etc etc

Re: Mirrors that work

Posted: Sat Mar 14, 2009 1:06 pm
by acapulcoGP
Not to hijack this thread, but what GPS mount are you using?

Re: Mirrors that work

Posted: Sat Mar 14, 2009 3:55 pm
by deilenberger
acapulcoGP wrote:Not to hijack this thread, but what GPS mount are you using?
Since I see no GPS mounts in this thread - I'm thinking - just perhaps - you might have better luck starting a NEW thread with the subject - R1200R GPS mount?

Just a thought.

Re: Mirrors that work

Posted: Sun Mar 15, 2009 12:06 am
by acapulcoGP
deilenberger wrote:
acapulcoGP wrote:Not to hijack this thread, but what GPS mount are you using?
Since I see no GPS mounts in this thread - I'm thinking - just perhaps - you might have better luck starting a NEW thread with the subject - R1200R GPS mount?

Just a thought.
If you look at the head on shots of posted by Bobby, you can clearly see a GPS unit mounted on the clutch side bar.

Re: Mirrors that work

Posted: Sun Mar 15, 2009 4:37 am
by thepeacebullgrunt
I installed this one and it works fine without any vibrations: http://www.techmounts.com/products/inde ... uct_id=109

Re: Mirrors that work

Posted: Sun Mar 15, 2009 5:07 am
by celticus
I have seen mirror mounted turn signals that I like. The ones on the R1200S and on several Suzuki's look nice but those on the Kawasaki shown on this thread are not doing it for me. For the time being I am very happy with the looks and functionality of my R1200ST mirrors. Mine do not vibrate.

Mark

Re: Mirrors that work

Posted: Sun Mar 15, 2009 7:15 pm
by thepeacebullgrunt
Please Celticus show us the mirrors with turn signals that you like...or please post a link soon ?

I finally find a way to get the MFW Master Flash Mirrors in US.
But Geeeeez ! :evil: they cost $430 the pair before taxes with all the required accessories....

I am actually trying to find a way to get them cheaper.

Celticus, what don't you like with these "MFW Master Flash Mirrors" ?

Re: Mirrors that work

Posted: Mon Mar 16, 2009 5:41 am
by celticus
http://www.motorcycle-usa.com/PhotoGall ... Q1728e.jpg

Finding a good example of an R1200S mirror was harder than I thought.
These mirrors just look like they belong on the bike.

Mark

Re: Mirrors that work

Posted: Mon Mar 16, 2009 5:48 am
by thepeacebullgrunt
Oh ! yes you right I don't know which one to choose now...Wellllll :-k I might take them all finally.

Re: Mirrors that work

Posted: Mon Mar 16, 2009 8:51 am
by vodka
Celticus..looked at the picture.......what mirrors,what bike??????

Re: Mirrors that work

Posted: Mon Mar 16, 2009 9:11 am
by celticus
Mirrors like that and "S" Wheels on my bike would be a good thing.

Mark

Re: Mirrors that work

Posted: Sat Mar 28, 2009 4:22 pm
by spoonyfork
I purchased the Napoleon bar end mirrors based on the description and photos in this thread. They were $31.99 each and free shipping from http://www.motosport.com/street/product ... gId=110836 for a total of $63.98 and about 30 minutes of installation time. You have to "flip" one of them to be the left mirror by removing the internal bolt and rotating the stalk 180 degrees. The installation on my 2008 R1200R was pretty simple. The mirrors come with a longer bar guard bolt. You simply remove the original bar guard bolt and thread the whole thing together with the longer bolt and tighten. I did notice that out of the box the mirrors left a centimeter gap between the end of the bar guard and the mirror base which left the mirror loose even though I tightended it down. To remediate this I put on two black rubber washers to act as spacers which did the trick (see attached photo circled in red).

Image

I like how these mirrors lower the visual profile of the bike as well as clean up the forward visual field. The rear visual field is improved because I can see more to the left and right behind me without half a mirror of elbow. Thank you BobbyLeBout and everyone else for contributing to this thread.

Image

Re: Mirrors that work

Posted: Sat Mar 28, 2009 4:53 pm
by celticus
Be looking good Spoonyfork. Good price also.

Mark

Re: Mirrors that work

Posted: Mon Apr 27, 2009 11:33 am
by spoonyfork
I put about 1000 miles on with the Napoleon bar ends mirrors. Over time I noticed that at higher speeds on the freeway (70-80 MPH) I picked up a slight front wobble felt in the handle bars that I didn't get with the stock mirrors. This last weekend I replaced the Napoleon's with the stock mirrors and rode the same freeway to test and sure enough the wobble was gone. Without any more scientific proof than that, I concluded that these non-aerodynamic mirrors at the extreme end of the handle bars were causing some kind of harmonic vibration. I really like these mirrors but they don't feel safe to me at higher speeds. Has anyone else using the Napoleons noticed similar behavior?

Re: Mirrors that work

Posted: Wed Apr 29, 2009 3:35 pm
by RonR
Installed K1200R mirrors yesterday and managed a test ride up Angeles Crest this morning. Image
Here are some photos:
Image
Image
Image
Image
Image
L.A. is down there. Somewhere. And I'm up here...Image

OK, my initial impression, based on about 25 freeway miles and 70 in the mountains, is very favorable. Compared to the stock Mickey Mouse ears, these are very solid. Minimal vibration or blurriness (is that a word?), none really noticeable at any RPM above idle. The stalks are somewhat shorter and flatter than the original's. Compared to the Wunderlich bar-ends I have removed, larger viewing area and way less vulnerable while lane-splitting. The oval shape provides a better field of view than the stock items. As far as aesthetics, judge for yourselves. I like the look. I noticed another member paid $87 for these from Chicago BMW last year. Three weeks ago they cost me about $108, same source.

Re: Mirrors that work

Posted: Thu Apr 30, 2009 8:54 pm
by AmostThere
Hey Ron, they look good and sounds like they work well but you're killing all of us wage-slaves with your ride report from Wednesday morning in the mountains while we've got our noses to the grindstone down in the salt mines :D :D :D :D

I know you probably told us but I didn't see it, do those mirrors thread into the stock brackets or do they come with a new bracket all their own?

Re: Mirrors that work

Posted: Thu Apr 30, 2009 10:43 pm
by RonR
AmostThere wrote:...do those mirrors thread into the stock brackets or do they come with a new bracket all their own?
These thread into the stock adaptors and use the stock rubber nut cover.